Misting System Kits & Supplies
Ecologic Technologies Misting System Kits are loaded with great features! They're extremely simple to setup & operate, are very versatile, and can be used for many different cooling, misting and humidification applications. Some of the most popular uses for our products include domestic & exotic animal cooling, vivarium & terrarium humidification, bonsai & orchid propagation, odor control and concrete curing, mushroom farming, aviaries, zoo display exhibits, wildlife parks & greenhouse humidification, static electricity control, dust suppression, machine cooling, and aeroponics, just to name a few!

Note: $10.00 Minimum order for fog nozzles & accessories.

Tee & Elbow Style Nozzle Assemblies
Use with any of our misting systems. Two types are available. Choose the Elbow Style Nozzle Assembly for use at the end of misting lines or the Tee Style Nozzle Assembly for everywhere in between. Tees allow water to pass through to other nozzles on the line while an Elbow only allows water to enter from one side. Each Nozzle Assembly includes a misting nozzle, nozzle filter screen, female coupling, tee or elbow style hose fitting and hose clamps.

Choose the 1/4" Nozzle Assembly for the Rainmaker I or Rainmaker Jr. Misting System Kits.
Choose the 3/8" Nozzle Assembly for the Rainmaker I Expanded Misting System Kit.
Each nozzle assembly includes one nozzle of your choice. See nozzle specifications at the top of this page. 
If no nozzle is specified, Low Flow Wide Angle Nozzles (red) will be included.

*Rainmaker I Misting System Kits purchased before June 30,1997 require the 3/8" nozzle assemblies.

Click here to see a Graphic of a Misting Nozzle Assembly Installed in a Terrarium, Vivarium, Aeroponics Chamber, etc.

Replacement 1/2 Round Nozzle Filter Screens
Change your nozzle filter screens every six months or whenever a reduced flow or odd spray pattern is noticed. 200 mesh.

Stainless Steel Hose Clamps
Heavy duty 316 marine grade. Tighten with a standard flathead screwdriver.

Teflon Plumbers Tape
Use to insure a leak free seal on all threaded fittings. 2-3 wraps is usually sufficient on smaller fittings and misting nozzles. 520" x 1/2" roll size.

High Quality Quick Disconnects With Auto Shutoff
Use wherever a quick disconnect is desired. Try one between the pump and reservoir to facilitate cleaning of the reservoir or at the beginning of branch lines to shut off an entire line. Simply push the button to disconnect . Shuts off flow on both sides. White Delrin. Buna Seal. Max 120 PSI.

Good Quality Quick Disconnect, NO Shutoff
Use wherever a quick disconnect is desired. Try one between the pump and reservoir to facilitate cleaning of the reservoir. White Delrin, Buna Seal. Max 120 PSI. Simply push the button to disconnect.

Mini Strainer
Add a strainer between your pump & reservoir to insure that no debris enters your system. Strainers are outfitted with hose barbs and include a 100 mesh filter screen. Filter screens are long lasting, simply unscrew the bottom of the strainer, remove the screen, rinse and replace. For light duty use.

Large Strainer
Add a strainer between your pump & reservoir to insure that no debris enters your system. Strainers are outfitted with hose barbs and include a 100 mesh filter screen. Filter screens are long lasting, simply unscrew the bottom of the strainer, remove the screen, rinse and replace. Recommended for heavy duty use.